Home › Masonry Waterproofing and Coatings
Superior Masonry Montgomery applies masonry waterproofing and coatings to protect commercial buildings across Montgomery, AL. We install sealers, elastomeric coatings, and flashing details that keep water out of brick, block, and stone walls. Extend the life of your facade with targeted protection.
Superior Masonry Montgomery provides professional masonry waterproofing throughout Montgomery, AL, Alabama and the surrounding area. Our licensed, insured crew delivers safe, clean, on-time work with a free estimate before anything begins. Call (334) 781-4198 or request your free quote.
Targeted Masonry Waterproofing for Montgomery’s Climate
Masonry in Montgomery faces a unique mix of blazing summer sun, sudden downpours, and high humidity. That combination can drive moisture deep into brick, block, stone, and mortar, then break them down over time. Superior Masonry Montgomery focuses our masonry waterproofing around these specific conditions so your walls, chimneys, foundations, and columns resist water without losing their ability to breathe.
We do not believe in one product for every surface. A 1950s brick bungalow near Cloverdale needs a different waterproofing approach than a newer block warehouse toward the Hyundai plant. We start by identifying what your masonry is made of, how it was constructed, and where water is actually getting in. Then we match the right breathable coatings and sealers to your specific structure so you get protection that fits the material and the local weather, not a generic spray and pray solution.
Our goal is always the same: stop water infiltration, prevent future damage, and preserve the original look of your masonry as closely as possible, all while choosing products that can handle Montgomery’s heat and afternoon storms.
Detailed Inspection and Moisture Diagnostics
Every masonry waterproofing project by Superior Masonry Montgomery begins with a structured inspection, not with a pressure washer or a sprayer. We walk the full exterior and any accessible interior surfaces, noting cracks, open mortar joints, flaking brick faces, efflorescence (white salts), rust stains around lintels, and signs of trapped moisture like blistering paint inside.
We then look closely at the water pathways that are specific to your property. Gutters that dump water against a brick wall, sprinklers hitting a block foundation, or negative grading that slopes soil toward a basement wall are all common in Montgomery neighborhoods and can defeat even the best waterproofing if left uncorrected. We may lightly probe mortar to check for softness, use a moisture meter on interior walls, and inspect weep holes and flashing details where available.
From there, we explain what we found in plain language. For example, we might tell you that your front brick steps are taking water through hairline mortar cracks and unsealed tread surfaces, or that your chimney crown is sucking in water and feeding leaks into the attic. This documented assessment shapes the waterproofing plan and also helps you prioritize any related drainage or gutter work that should be handled along with or before coating.
Preparation, Cleaning, and Masonry Repairs Before Coating
Proper prep is where many waterproofing jobs cut corners. At Superior Masonry Montgomery, we spend as much time preparing the masonry as we do applying coatings, because no sealer will perform well if it is sitting on dust, algae, loose mortar, or unstable brick faces.
We begin with cleaning that is matched to the masonry condition. For most exterior walls we use controlled low to medium pressure washing combined with masonry-safe cleaners that remove mold, mildew, efflorescence, and red clay stains common in central Alabama. On older or softer brick in areas like Old Cloverdale, we often reduce pressure further or use gentle chemical cleaning and soft brushing to avoid surface damage.
Once the surface is clean and dry, we handle repairs. This can include tuckpointing deteriorated mortar joints, patching cracks in block foundations, repairing or replacing damaged brick units, and addressing failing chimney crowns or caps. On foundation walls we may install hydraulic cement in active seepage cracks before applying any waterproofing. Skipping these repairs and simply coating over defects would trap problems in place and shorten the life of the waterproofing.
Only when the masonry is sound and clean do we move to priming or direct application of sealers and coatings. This preparation stage is clearly reflected in our estimates so you know exactly what is being fixed before anything is sealed.
Waterproofing and Coating Options We Use
Superior Masonry Montgomery selects products based on how your masonry needs to perform. We typically group our masonry waterproofing systems into three categories, each with a specific purpose and set of benefits.
Penetrating sealers (silane, siloxane, or blends) are our primary choice for most vertical brick and block walls. These products soak into the masonry to form a water repellent barrier inside the pores instead of forming a surface film. They reduce water absorption while allowing vapor to escape, which is essential in Montgomery’s humid climate. They keep brick looking natural, do not yellow, and are a good fit for homes and historic facades where appearance matters.
Elastomeric and acrylic coatings are used when we need to bridge hairline cracks or provide a more continuous protective skin, often on block foundations, parapet walls, and commercial buildings. These coatings are thicker than paint, flex slightly with temperature changes, and can be tinted to match or change the color of the wall. We pay close attention to film thickness and the number of coats, since coverage in square feet per gallon affects durability and cost.
For interior foundation or basement spaces where water intrusion is more severe, we may use cementitious waterproofing coatings directly on the masonry. These become part of the surface itself once cured and can withstand direct water pressure. In some cases we combine interior coatings with exterior drainage improvements for a complete system. During our proposal, we specify which type or combination of products we recommend, why they fit your situation, and what maintenance they will require over the years.
What Drives Masonry Waterproofing Cost in Montgomery
Homeowners and building owners often ask why one waterproofing quote can be significantly higher or lower than another. Superior Masonry Montgomery breaks down pricing in a transparent way so you can see what actually affects cost.
Total wall area is one major factor, but it is not the only one. The amount of preparation and repair required can change pricing more than square footage. A clean, newer brick veneer in East Montgomery with minor mortar cracks might only need localized tuckpointing and a penetrating sealer. A 1930s solid brick structure with multiple spalled bricks, deep mortar erosion, and heavy efflorescence will need more labor and materials before we even open a bucket of sealer.
Access is another cost driver. Tall chimneys, parapets, or multi story walls that require scaffolding or lift equipment will be priced differently than a single story ranch home. We also factor in whether we are treating only the exterior, both exterior and interior, or combining wall waterproofing with foundation crack repair.
Product choice makes a difference as well. High performance penetrating sealers and elastomeric coatings cost more per gallon than basic water repellents sold at big box stores, but they also last longer and hold up better to our sun and storms. In our written estimate we specify the product type, expected lifespan under Montgomery conditions, the number of coats, and the prep steps included so you can compare our proposal fairly to others.
Common Local Moisture Problems and How We Solve Them
Masonry waterproofing needs are rarely identical from one property to another, even within the same Montgomery neighborhood. Our team has seen recurring issues across the city, and we tailor solutions based on this experience.
Exterior brick leaking into interior drywall is common where old sealers have failed or where windows, sills, and flashing have gaps. In those cases we pair selective brick repointing and penetrating sealer application with sealing around openings and checking weep holes so moisture can escape instead of building up behind the wall.
For crawlspace foundations in older Montgomery homes, we frequently encounter block walls with efflorescence and occasional seepage during heavy rains. Our approach usually combines cleaning, crack repair, and either an interior cementitious waterproofing coating or an exterior penetrating treatment, depending on access. We also discuss grading and gutter adjustments, because in our soil and rainfall patterns, surface water control is just as important as coating choice.
Chimneys are another weak point. Cracked crowns, missing mortar at the top courses, and porous brick can all feed water into a home. We repair or rebuild crowns with proper slope, seal vertical brick with a breathable sealer, and install or verify chimney caps where needed. This targeted waterproofing strategy stops water at the source while preserving the chimney’s exterior appearance.
Why Choose Superior Masonry Montgomery and How to Get Started
Masonry waterproofing is not simply painting a wall with a water resistant product. It is a combination of building science, product knowledge, and hands on masonry skill. Superior Masonry Montgomery brings all three to every project. Our crews are masonry specialists first, so the repairs and prep that support your waterproofing are completed to a high standard, not treated as an afterthought.
We are familiar with local expectations from Montgomery property managers, HOAs, and historic districts. For visible facade work in sensitive areas, we focus on clear or color matched systems that protect masonry without drastically changing its appearance. On commercial and multifamily sites, we coordinate with your maintenance staff and other trades so that gutter work, painting, and waterproofing support each other instead of working at cross purposes.
Our process is straightforward. We start with an on site assessment, then provide a written proposal that outlines the areas to be treated, the prep and repair scope, the specific waterproofing or coating products, and an estimated service life based on local conditions. We also discuss timing around weather, since humidity and temperature in Montgomery can affect curing times and application windows.
To schedule an evaluation for your brick, block, or stone surfaces, contact Superior Masonry Montgomery. We will help you understand where water is getting in, what it will take to stop it, and how to maintain your masonry so you are not dealing with the same moisture problems again in a few years.
